Resilient Sound Isolation Clip-1: RSIC-1®
The RSIC-1 is designed for use with various framing designs and applications. The RSIC-1 decouples the gypsum board from the framing in wall and floor ceiling assemblies. The RSIC-1 has been acoustically tested, and adds 15 to 20 STC an IIC pts to your existing assemblies. Reducing the noise transfer by 75–100 percent.
When designed correctly into the wall or ceiling, there can be a substantial project cost savings.
Resilient Sound Isolation Clip: RSIC-1 Backer®
RSIC-1 when used with the RSIC-BB is the only complete isolation system that can support heavy loads such as cabinets, bookshelves, chalkboards, handrails, grab bars, and other heavy focused loads.
RSIC-1 + RSIC-Backer = The Total Solution
When designed correctly into the wall or ceiling, there can be a substantial cost savings for the project.
Resilient Sound Isolation Clip-V: RSIC-V®
The RSIC-V is designed for use with various framing designs and applications. The RSIC-V limits the connection points between the gypsum board and the structure in walls and ceilings. The RSIC-V has been acoustically tested in wall systems and adds the assurance that your projects acoustical performance will improve drastically.
Resilient Sound Isolation DeCouple Clip: RSIC-DC04®
The RSIC-DC04 and RSIC-DC04X2® are versatile products. The most common use is the decoupling of wall systems. The design of the RSIC-DC04 can be used in new construction or retrofit. The RSIC-DC04X2 is twice as strong as the RSIC-DC04 for use when heavy items need to be acoustically decoupled for noise isolation. Below are some examples of the possible uses for the RSIC-DC04.
Resilient Sound Isolation Clip for Universal Applications: RSIC-U®
The RSIC-U is designed for use with various wall designs. The RSIC-U decouples the wall framing from the floor and ceiling structure. The RSIC-U system eliminates flanking paths normally caused by a wall directly connected the floor or ceiling. When combined with the RSIC-1 wall system the highest possible noise control can be achieved by preventing noise from passing through wall framing into the adjoining structure. The RSIC-U works directly with the RSIC-1 to achieve total decouple walls from the structure.
|PACI_09 21 16_SD_RSIC-1_Backer_2019|
|PACI_09 21 16_SD_RSIC-DC04_2019|
|PACI_09 21 16_SD_RSIC-U_2019|
|PACI_09 21 16_SD_RSIC-V_2019|