CMD Group is a ConstructConnect® company. Learn more

Resource Center

Building Types


Fill out the form to get a demo of our project database

Total value of Tennessee construction projects currently in our database:

Commercial Projects (value)
Pre-Bid Phase:$9,763,890,777
Bid Phase:$135,636,914
Post-Bid:$42,069,502,336
Civil Projects (value)
Pre-Bid Phase:$644,588,300
Bid Phase:$58,868,138
Post-Bid:$14,360,348,619



Aircraft Hangar Project Case Study in Tennessee

This project information is pulled from our archive of hundreds of thousands of construction projects. Use it to research ideas and potential partners for your own project. Additional examples of aircraft hangar projects in Tennessee are also available.

Project Overview

Project Title:TNDOT BOONE RD BRIDGE
Estimated Value:$1,068,810
The cost to build water and sewage piping in Tennessee depends upon the location, project scope, specific components used and current market conditions. If you are looking to size the cost of building a project similar to this one,

Project Location

State:Tennessee
County:Washington
City:Johnson City
Address:Boone Rd Over CSX Railroad

Project Type

Building Category:Water and Sewage Piping, Aircraft Hangars, Bridges & Culverts, Excavating & Grading
Work Type:New

Project Description:

Bridge[s] & Culvert[s], Road[s], Excavating & Grading, Sewage Piping The construction of a concrete Bulb-Tee beam bridge on Boone Road over the C.S.X. Railroad(L.M. 0.43),including grading,drainage,and paving. 105-01 CONSTRUCTION STAKES,LINES AND GRADES LS 1.000 201-01 CLEARING AND GRUBBING LS 1.000 203-01 ROAD&DRAINAGE EXCAVATION(UNCLIFIED)C.Y. 6091.000 203-04 PLACING AN SPREADING TOPSOIL C.Y. 169.000 203-06 WATER M.G. 11.000 203-07 FURNISHING&SPREADING TOPSOIL C.Y. 132.000 204-06 BEDDING MATERIAL(PIPE)CLASS A C.Y. 15.000 209-02.03 8" TEMPORARY SLOPE DRAIN L.F. 36.000 209-03 CHECK DAMS S.F. 84.000 209-05 SEDIMENT REMOVAL C.Y. 55.000 209-08.03 TEMPORARY SILT FENCE(WITHOUT BACKING)L.F. 1060.000 209-40.41 CATCH BASIN FILTER ASSEMBLY(TYPE 1)EACH 1.000 209-40.46 CATCH BASIN FILTER ASSEMBLY(TYPE 6)EACH 1.000 303-01 MINERAL AGGREGATE,TY A BASE,GRADING D TON 873.000 307-01.01 ASP. CONC. MIX(PG64-22)(BPMB-HM)GR. A TON 112.000 307-01.08 ASPHALT CONC MX(PG64-22)(BPMB-HM)GR B-M2 TON 131.000 402-01 BITUMINOUS MATERIAL FOR PRIME COAT(PC)TON 1.000 403-01 BITUMINOUS MATERIAL FOR TACK COAT(TC)TON 1.000 411-01.10 ACS MIX(PG64-22)GRADING D TON 114.000 607-03.02 18" CONCRETE PIPE CULVERT(CLASS III)L.F. 71.000 611-07.01 CLASS A CONCRETE(PIPE ENDWALLS)C.Y. 1.000 611-07.02 STEEL BAR REINFORCEMENT(PIPE ENDWALLS)LB. 132.000 611-28.02 CATCH BASINS,TYPE 28,>4'-8' DEPTH EACH 1.000 611-42.01 CATCH BASINS,TYPE 42,0'-4' DEPTH EACH 1.000 702-01 CONCRETE CURB C.Y. 7.000 705-01.01 GUARDRAIL A BRIDGE ENDS L.F. 108.000 705-02.02 SINGLE GUARDRAIL(TYPE 2)L.F. 206.000 705-04.04 GUARDRAIL TERMINAL(TYPE 21)EACH 3.000 705-04.05 GUARDRAIL TERMINAL(TYPE-IN-LINE)EACH 1.000 709-05.06 MACHINED RIP-RAP(CLASS A-1)TON 129.000 712-01 TRAFFIC CONTROL LS 1.000 712-02.02 INTERCONNECTED PORTABLE BARRIER RAIL L.F. 40.000 712-05.01 WARNING LIGHTS(TYPE A)EACH 8.000 712-06 SIGNS(CONSTRUCTION)S.F. 209.000 712-07.03 TEMPORARY BARRICADES(TYPE III)L.F. 40.000 716-05.01 PAINTED PAVEMENT MARKING(4" LINE)L.M. 0.600 717-01 MOBILIZATIO LS 1.000 740-10.03 GEOTEXTILE(TYPE III)(EROSION CONTROL)S.Y. 72.000 775-23.66 8IN DUCTILE IRON PIPE L.F. 720.000 775-23.67 8IN X 8IN X 8IN DUCTILE IRON TEE EACH 1.000 775-23.68 8IN GATE VALVE AND VALVE BOX EACH 4.000 775-23.69 8IN 45degrees BEND EACH 4.000 775-23.70 8IN 22.5degrees BEND EACH 2.000 775-23.71 8IN 11.25degrees BEND EACH 2.000 775-23.72 8IN CAP EACH 1.000 775-23.73 4IN TAPPING VALVE EACH 1.000 775-23.74 16IN STEEL ENCASEMENT PIPE L.F. 50.000 775-23.75 STONE BACKFILL FOR OUTSIDE PAVED AREAS TON 50.000 775-23.76 MISCELLANEOUS CONCRETE FOR PIPE RESTRAIN C.Y. 12.000 775-23.77 BRIDGE CROSSING(HANGER SYSTEM&INSTALLA LS 1.000 775-23.78 FLUSHING VALVE EACH 1.000 775-23.79 RELOCATE/RECONNECT EXISTING METER EACH 3.000 775-23.80 4IN X 8IN D.I. REDUCER EACH 2.000 775-23.81 4IN X 4IN X 4IN D.I. TAPPING SLEEVE EACH 1.000 775-23.82 4IN CAP EACH 1.000 775-23.83 8IN FLEXABLE/EXPANSION JOINT EACH 2.000 801-01.07 TEMPORARY SEEDING(WITH MULCH)UNIT 10.000 801-02 SEEDING(WITHOUT MULCH)UNIT 20.000 801-03 WATER(SEEDING&SODDING)M.G. 3.000 805-12.02 EROSION CONTROL BLANKET(TYPE II)S.Y. 1811.000