Companies

CMD SpecResources

20870 Redside Ct.
Bend, OR 97701-6733
Phone:
(541) 330-0668
Fax:
(541) 389-7207
03 00 00 - Concrete
04 00 00 - Masonry
05 00 00 - Metals
08 00 00 - Openings
09 00 00 - Finishes
10 00 00 - Specialties
11 00 00 - Equipment
12 00 00 - Furnishings
21 00 00 - Fire Suppression
22 00 00 - Plumbing
23 00 00 - HVAC
26 00 00 - Electrical
27 00 00 - Communications
31 00 00 - Earthwork
33 00 00 - Utilities
34 00 00 - Transportation

Structus NO-COAT® and Hydrotrim Corner Structural Laminate Drywall

Product Overview

The NO-COAT® Structural Laminate (SLAM™) Drywall Corner System is a complete system for precise angle, archway and inside or outside corner finishing. NO-COAT installs faster and provides superior strength, durability and bottom line savings in labor and mud compared to traditional corner bead design.

Product Description, Applications
The NO-COAT® Structural Laminate (SLAM™) Drywall Corner System abandons corner bead design entirely, and instead integrates new technologies and 3 key components:

  • Tapered copolymer core that will not rust, requires less mud and is capable of withstanding severe impacts
  • Joint tape that permanently bonds the corner to drywall with all-purpose joint compound
  • Formulated surface paper that eliminates cracks, chips and peels, accepts any finish and resists abrasion

Construction, Materials, Finishes
NO-COAT Structural Laminate Drywall Corners are constructed with a high-strength, tapered copolymer core. The surface is composed of tight-fibered, formulated paperboard; the back is composed of joint tape paper for uniform surface bonding.

ULTRAFLEX®
ULTRAFLEX corner trims are ideal for off-angle applications, short and long runs and for repairing damaged drywall corners. The wide flange covers large gaps and poor framing, while the built-in flexible hinge fits any inside or outside corner angle to create crisp, straight lines. ULTRAFLEX corners will withstand significant shifting due to settling and temperature and humidity variations without cracking or separating from the wall. They provide an ideal surface for paint and textures and will accept sanding without surface degradation.

  • ULTRAFLEX 325 - For short runs of less than 10' (3 m); vertical off-angle applications and stand-ups; and 90 degree inside/outside corners
  • ULTRAFLEX 450 Drywall Corner Trim - For long peaks/spans greater than 10' (3 m); vaulted, cathedral and tray ceilings; and inside/outside corners of any length
  • ZOOMA-FLEX - For short runs/spans less than 10' (3 m); inside off-angles; and 90 degree inside corners
ULTRATRIM®
ULTRATRIM precut corner trim lengths create perfect corners and are fast and easy to install. They accept sanding without surface degradation and provide an ideal surface for paint and textures. ULTRATRIM corners withstand severe impacts, settling and seismic movements without cracking, denting, chipping, peeling or separating from the wall. They will also withstand significant shifting due to temperature and humidity variations.
  • ULTRATRIM INSIDE 90 - Precut to standard lengths for use on 90 degree inside corners
  • ULTRATRIM OUTSIDE 90 - Precut to standard lengths for use on 90 degree outside corners
  • ULTRATRIM 1/2" L TRIM - For use on window returns, door enclosures, drop ceilings and protective edging with no masking required; strong enough to float 3/4" (19.1 mm) beyond drywall; large flange works on gaps to 1" (25.4 mm)
  • ULTRATRIM 5/8" L TRIM - For use on window returns, door enclosures, drop ceilings and protective edging with no masking required; strong enough to float 3/4" (19.1 mm) beyond drywall; large flange works on gaps to 1" (25.4 mm)
  • ULTRATRIM 3/8" BULLNOSE - Ridge-free radius; for use on 90 degree outside corners; eliminates transition angles and bead ridges for superior aesthetic results
  • ULTRATRIM 3/4" BULLNOSE - Ridge-free radius; for use on 90 degree outside corners; eliminates transition angles and bead ridges for superior aesthetic results
  • ULTRATRIM 135° 3/4" BULLNOSE - Ridge-free radius; for use on 135 degree outside corners; eliminates transition angles and bead ridges for superior aesthetic results
ULTRA ARCH®
ULTRA ARCH tape-on drywall arches have notched flanges that flex and conform to any arch without spray glues or staples. The stiff profile and preformed, uniform 90 degree angle fine tunes poor framing and creates a smooth, round drywall arch.
  • ULTRA ARCH 3/8" BULLNOSE - For use on 90 degree bullnose archways
  • ULTRA ARCH 3/4" BULLNOSE - For use on 90 degree bullnose archways
  • ULTRA ARCH OUTSIDE 90 - For use on 90 degree outside archways

COLOR
White, Off-White.

Features, Advantages

  • Cost effective - Saves up to 50% on labor and materials and eliminates drywall repairs and callbacks
  • Rolls and precut lengths enable fast application
  • Tapered copolymer core ensures precise, straight corners; adjusts and squares irregular framing
  • Permanently bonds corner to drywall with all-purpose joint compound
  • Joint paper resists abrasion and will not “alligator” or wrinkle
  • Absorbs settling and seismic movements with superior strength and durability - Will not crack, dent or chip
  • Uniformly accepts paint and texture for a superior finish; does not require compound or coating at the corner apex
  • Integrates seamlessly with other corner products

Technical Specifications:

SpecData datasheets available for downloadMANU-SPEC 3-Part Specifications

 
Structus HYDROTRIM Water-Activated Drywall Corners  
Structus NO-COAT (green)  

SpecData datasheets available for downloadSPEC-DATA Technical Datasheets

 
Structus HYDROTRIM Water-Activated Drywall Corners (green) 
Structus NO-COAT (green) 

Get More Information

Contact Information

First name:
Last name:
Email:
Phone#:
Company:
Title:

Your Role in the Construction Industry

Role:

Specific Needs

Let us know what you are specifically looking for, including what type of project you are working on.

Project Type:
CAPTCHA Image
Enter this code:
(to prove you're human)