CMD Group is now a ConstructConnect™ company. Learn more

RSMeans’ dollars-per-square-foot construction costs: four office building types of structure

02/17/2010 by Alex Carrick

Share

Accompanying this report are tables and charts based on RSMeans’ measures of dollar-per-square-foot construction costs. The results for 25 major cities are shown for four office building types differentiated by height and usage. Means has altered specifications with regard to its costing model for a medical office building. Therefore, with respect to a medical office building, it is not valid to compare this year’s figures with last year’s to determine percentage changes. The specifications for the other three categories of commercial office buildings, categorized by number of stories, remained the same.

Ranking by expense

Among the four office building designations set out in the table and graphs, it is most expensive to build a medical office facility. Among commercial office buildings, the dollar-per-square-foot construction cost diminishes with height. It is about 10% cheaper to build an 11- to 20-story building than a five- to 10-story building. In turn, a five- to 10-story office building is about 4% cheaper to build than one that is two- to four-stories tall.

New York is the most expensive; cities in the South are least expensive

New York has the highest dollar-per-square-foot construction costs in the country. San Francisco, Boston, Chicago and Philadelphia are the other centers that make up the top five among major U.S. urban areas. Relatively low-cost cities are mainly in the southeast and southwest, including Miami, Phoenix, Atlanta, Houston and Dallas. New Orleans is also low cost despite the restoration that has been underway since Hurricane Katrina.

Kansas City, St. Louis, Portland and Pittsburgh are smack dab in the middle among the 25 cities considered in the table and graphs. Cleveland, Washington and Denver are in the low mid-range for construction costs among the 25 cities considered. Seattle, San Diego and Detroit are upper middle-range. Minneapolis is sixth most expensive in the nation.

On the Pacific Coast, dollar-per-square foot construction costs in Los Angeles, Seattle and San Diego are between 13% and 16% lower than in high-cost San Francisco. Portland is nearly one-fifth (18%) less expensive for building than the City by the Bay.

Some other city comparisons

In some other city comparisons, it now costs about 32% more to build in Chicago than in Atlanta. The relationship is almost the same (+28%) between higher-cost Philadelphia and lower-cost Miami. The mark-up in New York, the most expensive city among the 25 shown, and Winston-Salem, N.C., the least expensive, is almost three-quarters (+74%).

Percentage changes by type and by city

Year-over-year cost comparisons can only be made for commercial office buildings. The year-over-year change for a medical office building is invalid due to specification upgrades.

Pittsburgh, Boston, Minneapolis, Philadelphia, New York, Seattle and Chicago have turned in the largest year-over-year percentage gains in square footage costs. In no case, however, has the increase been particularly large. Pittsburgh, at +2.8% for a 5- to 10-story office building, was the largest. The average for the 25 cities combined ranged from -0.1% for a 5- to 10-story office building to -1.7% for an 11- to 20-story office building.

Atlanta, Houston, Washington and California’s three major centers – San Diego, Los Angeles and San Francisco – have recorded the largest percentage declines year over year.

Kansas City, Detroit, Denver, Dallas, Portland, Cleveland, Miami, Baltimore and St. Louis are centrally positioned for year-over-year price changes among the 25 cities.

U.S. dollars per square foot construction costs –
By type of structure – February 2010
    MAJOR CITIES
(alphabetically)
office building
(two to four stories)
office building
(five to 10 stories)
2010 2009   % Change 2010 2009   % Change
1   ATLANTA $153.00 $158.75   -3.6% $147.26 $150.72   -2.3%
2   BALTIMORE 160.74 163.86   -1.9% 154.72 155.57   -0.5%
3   BOSTON 204.80 203.10   0.8% 197.12 192.83   2.2%
4   CHICAGO 201.18 202.22   -0.5% 193.64 192.00   0.9%
5   CLEVELAND 172.10 175.12   -1.7% 165.65 166.26   -0.4%
6   DALLAS 148.18 150.30   -1.4% 142.62 142.70   -0.1%
7   DENVER 164.87 167.20   -1.4% 158.69 158.75   0.0%
8   DETROIT 179.16 181.63   -1.4% 172.44 172.45   0.0%
9   HOUSTON 150.42 155.41   -3.2% 144.78 147.55   -1.9%
10   KANSAS CITY 177.78 179.70   -1.1% 171.12 170.61   0.3%
11   LOS ANGELES 186.21 190.61   -2.3% 179.23 180.97   -1.0%
12   MIAMI 156.09 158.93   -1.8% 150.24 150.89   -0.4%
13   MINNEAPOLIS 194.82 193.25   0.8% 187.52 183.48   2.2%
14   NEW ORLEANS 153.17 156.46   -2.1% 147.43 148.55   -0.8%
15   NEW YORK CITY 230.79 230.03   0.3% 222.14 218.40   1.7%
16   PHILADELPHIA 199.98 199.23   0.4% 192.49 189.16   1.8%
17   PHOENIX 153.51 156.64   -2.0% 147.76 148.72   -0.6%
18   PITTSBURGH 174.17 171.78   1.4% 167.64 163.09   2.8%
19   PORTLAND 174.85 177.76   -1.6% 168.30 168.77   -0.3%
20   ST. LOUIS 177.61 181.10   -1.9% 170.95 171.95   -0.6%
21   SAN DIEGO 179.84 184.98   -2.8% 173.10 175.62   -1.4%
22   SAN FRANCISCO 213.06 217.89   -2.2% 205.07 206.87   -0.9%
23   SEATTLE 183.29 182.86   0.2% 176.42 173.62   1.6%
24   WASHINGTON, DC 171.07 175.47   -2.5% 164.66 166.60   -1.2%
25   WINSTON-SALEM 132.69 138.51   -4.2% 127.72 131.51   -2.9%
MAJOR CITIES
(alphabetically)
office building
(11 to 20 stories)
medical office building
2010 2009 % Change 2010 2009 % Change
1   ATLANTA $132.86 $138.19   -3.9% $191.09 $171.79   n/a
2   BALTIMORE 139.59 142.63   -2.1% 200.76 177.31   n/a
3   BOSTON 177.85 176.79   0.6% 255.79 219.78   n/a
4   CHICAGO 174.71 176.03   -0.7% 251.28 218.83   n/a
5   CLEVELAND 149.45 152.43   -2.0% 214.95 189.50   n/a
6   DALLAS 128.68 130.83   -1.6% 185.07 162.64   n/a
7   DENVER 143.17 145.54   -1.6% 205.92 180.93   n/a
8   DETROIT 155.58 158.10   -1.6% 223.76 196.54   n/a
9   HOUSTON 130.62 135.28   -3.4% 187.87 168.17   n/a
10   KANSAS CITY 154.38 156.42   -1.3% 222.04 194.45   n/a
11   LOS ANGELES 161.70 165.92   -2.5% 232.58 206.26   n/a
12   MIAMI 135.55 138.34   -2.0% 194.96 171.98   n/a
13   MINNEAPOLIS 169.18 168.21   0.6% 243.32 209.11   n/a
14   NEW ORLEANS 133.01 136.19   -2.3% 191.31 169.31   n/a
15   NEW YORK CITY 200.41 200.23   0.1% 288.25 248.92   n/a
16   PHILADELPHIA 173.66 173.42   0.1% 249.77 215.59   n/a
17   PHOENIX 133.31 136.35   -2.2% 191.74 169.50   n/a
18   PITTSBURGH 151.24 149.52   1.2% 217.53 185.88   n/a
19   PORTLAND 151.84 154.73   -1.9% 218.39 192.35   n/a
20   ST. LOUIS 154.23 157.64   -2.2% 221.83 195.97   n/a
21   SAN DIEGO 156.18 161.01   -3.0% 224.62 200.16   n/a
22   SAN FRANCISCO 185.02 189.66   -2.4% 266.11 235.78   n/a
23   SEATTLE 159.16 159.17   0.0% 228.92 197.88   n/a
24   WASHINGTON, DC 148.55 152.74   -2.7% 213.66 189.88   n/a
25   WINSTON-SALEM 115.23 120.57   -4.4% 165.73 149.88   n/a
Data source: Reed Construction Data – RSMeans.
Tables: Reed Construction Data – CanaData

Office building (two to four stories) construction cost:
February 2010 ranking of major U.S. cities
Office building ( five to 10 stories) construction cost:
February 2010 ranking of major U.S. cities
Office building (11-20 stories) construction cost:
February 2010 ranking of major U.S. cities
Medical office building construction cost:
February 2010 ranking of major U.S. cities
These charts and tables were abstracted from RSMeans cost data publications for the A/E/C industry. For more information about RSMeans Square Foot Cost Guide and RSMeans CCI (Construction Cost Index), which indexes square foot costs for cities in the U.S. and Canada, visit the online bookstore at www.rsmeans.com and click on cost data publications (or call 1-800-448-8182). “n/a” means not applicable. Recent adjustments to specifications mean that some year-over-year percentage changes will not be valid in 2010.
Data source: Reed Construction Data – RSMeans (www.rsmeans.com).
Charts: Reed Construction Data – CanaData

Recent Comments




Article Archive

Date Article
11/17/14 Top 10 largest construction project starts in the U.S. - October 2014
11/14/14 Non-residential Construction Starts Rose Gently in October
07/10/14 The Importance of Matching Volume to Contractor Capacity in JOC Procurement Strategy
07/10/14 Consider a Seed Project as Part of Your JOC Procurement Strategy
07/10/14 The Best Unit Price Book for Your Job Order Contract
07/02/14 ECONOMIC NUGGETS – July 1, 2014
10/23/14 Twenty major upcoming Water Treatment Plants and Manufacturing & Warehousing construction projects - U.S. - October 2014
10/23/14 Twenty major upcoming Alberta and British Columbia construction projects - Canada - October 2014
10/15/14 Trend lines of construction starts in Canada - September 2014
10/15/14 Top 10 largest construction project starts in Canada - September 2014
09/17/14 Twenty major upcoming midwest and northwest construction projects - U.S. - September 2014
09/17/14 Twenty major upcoming medical and educational construction projects - Canada - September 2014
09/17/14 Trend lines of construction starts in Canada - August 2014
09/17/14 Top 10 largest construction project starts in Canada - August 2014
08/15/14 Twenty major upcoming medical and educational construction projects - U.S. - August 2014
08/15/14 Twenty major upcoming industrial and water treatment construction projects - Canada - July 2014
08/15/14 Trend lines of construction starts in Canada - July 2014
08/15/14 Top 10 largest construction project starts in Canada - July 2014
07/24/14 Twenty major upcoming entertainment facility and stadium/arena construction projects - U.S. - July 2014
07/24/14 Twenty major upcoming Ontario and Quebec construction projects - Canada - July 2014
07/24/14 Trend lines of construction starts in Canada - June 2014
07/24/14 Top 10 largest construction project starts in Canada - June 2014
07/16/14
07/14/14 Top 10 largest construction project starts in the U.S. - June 2014
02/03/14 Infographic: Where Can You Use Project Leads in the Construction Process?
11/19/13 RSMeans White Paper Examines Break-even Point for LED Versus Fluorescent Lighting
11/20/13 RSMeans White Paper Examines Break-even for LED vs. Fluorescent Lighting
07/25/13 The Canadian Economy’s Two Great Blessings
02/15/13 Construction Economic Notes – February, 2013
11/05/12 Recycled-Content Tile
10/05/12 Fiber-Cement Siding
09/18/12 Return on Your Green Home Improvement Investment
08/09/12 Green Building Solutions to Stormwater Runoff
08/07/12 An “Aha” Moment Solves Challenge of Cost Estimating Local Circus Roof
07/19/12 Estimate Types
06/20/12 Ground-Source Heat Pump
05/14/12 Universal Design for Outdoor Living
04/23/12 What Is Universal Design?
04/09/12 Natural Landscaping
03/14/12 Green Material Alternatives for Plumbing Fixtures
03/02/12 Budgeting & Financing Green Construction
02/22/12 Greening Your Firm
02/10/12 Roofing Defects
02/06/12 Roofs: energy efficiency strategies
01/18/12 Commercial Real Estate and Green Construction
12/14/11 Renewable Energy & Distributed Generation Technologies
11/04/11 Tubular Skylights
10/04/11 Are Online Ads An Endangered Species?
09/27/11 Performance Bonds Guarantee Clients Receive Exceptional Service
09/15/11 Deconstruction for Green and Economic Benefit
09/01/11 4 Ways for Businesses to Create a Good First Impression on Twitter
08/11/11 Building Information Modeling (BIM) for Green Building
07/21/11 Green Alternatives for Concrete
07/12/11 Evaluating Products Over Their Life Cycle
06/30/11 Low-Cost Green Strategies
06/28/11 Bricks are from Venus, Clicks are from Mars
06/17/11 Zombie Avoidance Techniques for Building Product Manufacturers
06/08/11 Blogs & Websites: The 5 Signs of Website Wellness
06/06/11 Building Product Manufacturers & Green Products
06/01/11 Is Fear of Sharing Information Costing Your Company Sales?
05/26/11 What Are Green Products?
05/20/11 The Building Envelope
05/16/11 Blogging: Website Heal Thyself
05/03/11 Metals Compared to Wood for Sustainable Construction
04/12/11 Storm Water Collection & Infiltration
03/23/11 Commissioning the Green Building
02/23/11 Building Program for Green Design
01/21/11 Building Deconstruction Process
05/02/11 Why Building Product Manufacturers and Social Media Are a Marriage Made in Heaven
05/06/11 Building Product Manufacturers: How Understanding Architects Can Help Your Business
10/21/09 Distributors & Manufacturer Representatives
07/15/10 Estimating Doors: Tips from the Experts
07/06/10 How to Handle Construction Materials to Prevent Mold
06/21/10 How to Maximize the Benefits of Exterior Security Lighting
06/04/10 SmartBuilding Index
06/01/10 Regional Housing Construction Tracking and Forecast Information
05/28/10 How to Find Regional Construction Tracking and Forecast Information
05/24/10 Building Product Manufacturers
05/18/10 Practicing the Art of Sustainability - Why Atlanta's Current Building Codes Need Updating Now
02/23/10 Learning to use EE
11/10/09 Window & Glazing Estimating Tips from RSMeans
01/11/10 Earn AIA CEU Credit Attending RCD Webcasts
07/17/09 Cost Estimators Winning Work With BIM
07/16/09 Becoming an Invited Bidder - More Tips
07/16/09 Becoming an Invited Bidder - Tips
07/16/09 Becoming an Invited Bidder
07/16/09 SmartBIM Object Modeling Guidelines for Revit
07/15/09 Interference Check and BIM
06/26/09 A Look at Contractor Failure: Part 2
06/19/09 RicciGreene Associates
06/19/09 Doug Thornton AIA, LEED A.P. of AERC, PLLC
06/18/09 A Look at Contractor Failure: Part 1
06/12/09 Owners and SmartBIM Objects – What You Need To Do
06/10/09 Dealing with the IRS
06/05/09 Getting Paid on Construction Contracts
06/02/09 BIM Coordination and Collaboration
05/28/09 Marketing Your Construction Firm on the Cheap
05/20/09 Little Habits with Big Payoffs for Contractors
05/12/09 SmartBIM Spaces
05/07/09 AIA Show Recap as Seen by the SmartBIM Solutions Team
04/27/09 Business Case Study - Survey Of Spending Patterns In Educational Facilities
04/23/09 Taking Advantage of the Recession: Hiring the Right People
04/20/09 Cork as a Green Flooring Option
04/08/09 Owners - It's Time to Substantially Increase Your Architect's and Engineer's Fees
03/05/09 There's a Solution to Performing Time Consuming Quantity Take-Offs
02/20/09 SmartBIM Library is Half-Off for a Limited Time Only
02/09/09 You are Wasting Your Money
01/20/09 Obama: 'Dramatic Action' On Economy Needed
01/14/09 Use of BIM Jumps Dramatically Over Last 12 Months
12/10/08 Minimizing the Size of Family Files (Revit Objects)
11/11/08 Maximize Online Advertising Dollars
11/07/08 Architects and Engineers, WE NEED YOU
10/29/08 Why Do You Need SmartBIM Objects
10/28/08 Why Building Information Modeling?
10/29/08 10 Questions To Ask About BIM Objects
10/08/08 The Object Mess
10/07/08 Implementing BIM to Your Office
10/06/08 Meeting the Needs for Governmental BIM Compliance while Avoiding Current Liability Obstacles
09/15/08 The BIM Transformation is Manageable with the NEW SmartBIM Library v3
09/14/08 KOLBE Windows and Doors vs. Building Information Modeling
09/12/08 The Evolution of Building Information Modeling: BIM 1-2-3
08/11/08 BIM 101 Overview - From Hand Drawings, CAD and now BIM
08/12/08 Draper, Inc. on BIM Object Developments
07/08/08 IFD Library Partners work to establish standards for creators of BIM software
06/23/08 Architectural Education
06/17/08 Parametric Revit Objects – Part I - Fundamentals
06/17/08 Window Glazing Coefficients
06/01/08 Frequently Asked Questions About Building Codes
06/05/08 Calling All Current and Prospective Revit Users - This Blog Is For You
05/06/08 System Requirements for SmartBIM Library
05/06/08 SmartBIM Library 2.0 Release Notes
05/05/08 Building Information Modeling Moves into AEC Mainstream, Adding Value to Project Delivery Process
04/08/08 Flooring: Cost Considerations
02/08/10 General Contractors & Trade Contractors
01/24/08 Building Element Models (BEM)
12/21/07 LEED Certification Primer
12/13/07 Building Integrated Photovoltaics (BIPV)
09/24/07 Mixed-mode Building Design Combines Old and New Ideas
10/15/07 Checklists Identify Potential Envelope Design Improvements
10/24/07 Greenroofs as High Performance Design
10/21/07 What Makes a Building Product Green
10/24/07 Lighting Considerations in Green Building
10/24/07 Water Conservation in Green Buildings
10/24/07 Rainwater Collection Systems
10/24/07 Efficient Cooling Methods for Green Buildings
10/24/07 Controlling Heat Transfer in Green Buildings
10/24/07 Limiting Heat Loss Through Windows
10/23/07 Formaldehyde Use in Building Construction
10/23/07 Using Plants to Improve Indoor Air Quality
11/05/07 Greening Healthcare
10/19/07 Daylighting Controls
10/19/07 Use of Windows, Skylights and Light Pipes in Daylighting
10/19/07 An Overview of Daylighting
10/19/07 An Overview of Solar Ventilation Air Heating
10/19/07 Types of Collectors for Solar Water Heating
10/19/07 An Overview of Solar Water Heating
10/19/07 Cooling Load Advoidance
10/19/07 Components of Passive Solar Heating Designs
10/19/07 An Overview of Passive Solar Heating
10/23/07 Improving Indoor Air Quality
10/19/07 An Overview of The LEED Rating System
10/19/07 Cost Considerations in Building Deconstruction
10/17/07 Building Deconstruction
10/25/07 Roofing Considerations in Green Building
10/19/07 Green Site Selection and Development
10/24/07 Reducing Energy Use in Buildings
10/17/07 Green Demolition
10/18/07 Integrating Solar Power Generation into Buildings using Thin Film PV
09/10/07 Compost Company Promotes Green Environment
03/31/06 Green Roof Sets An Example For Minneapolis Sustainable Design

CMD Group- construction industry news-imageā€ title=