CMD Group is a ConstructConnect™ company. Learn more

Green Alternatives for Concrete

07/21/2011 by

Share

Concrete is a strong, durable material with high heat storage capacity that can be used to moderate building temperature swings. Because traditional concrete is one of the most inert building materials, it is also a good product from an indoor air quality standpoint, even for chemically sensitive people. (This is not completely true for high-tech concretes that contain chemical agents for workability and air-entraining.)


Concrete does, however, have some environmental drawbacks. It can cause water pollution if wash-out water from equipment at concrete plants or on job sites finds its way to local waterways. The pH of washout water is so high, it is toxic to aquatic life. Another concern is the production of cement, the binding agent used in concrete, which accounts for about 10%–15% of concrete’s mass, but 92% percent of its embodied energy. Cement manufacture is a major contributor to atmospheric greenhouse gases due to both its production and process emissions. According to a U.S. EPA report, in producing a total of 90 million metric tons of cement in 2001, the U.S. cement industry emitted 77 million metric tons of CO2. About 46% of these emissions are attributed to combusting fuel, predominantly coal and coke, to fire cement kilns to temperatures up to 3,400 degrees Fahrenheit; the remaining 54% of the emissions result from the chemical process of making cement, which involves converting limestone to calcium oxide and CO2. Cement production accounts for 1.5% of all U.S. CO2 emissions (according to the Portland Cement Association); worldwide, however, cement production causes over 8% of the total CO2 emissions attributed to human activity. To its credit, the cement industry has made great strides in recent decades to increase energy efficiency and reduce emissions. For instance, the chemical process in cement production that releases CO2 can be used to capture other combustion emissions such as sulfur dioxide and nitrogen oxide.


Furthermore, ongoing developments in concrete production can reduce environmental impacts by substituting other materials for cement. Up to 60% of the cement content used in traditional concrete may be replaceable with “supplementary cementitious material” (SCM) salvaged from industrial waste (or derived from natural soil or rock), depending on the concrete application, the type and quality of the substitute, and the results of batch testing. Industrial by-product SCMs include fly ash, a waste product from coal-fired power plants, blast furnace slag, a waste product from steel production, silica fume, a waste product from the silicon metal industry, and rice hull (or husk) ash, which is generated when agricultural rice waste is burned to produce power.


Replacing a percentage of the cement in concrete with an SCM reduces energy consumption and CO2 production, reduces solid waste, and can improve concrete strength, performance, and durability. Because power plants are common in most cities, fly ash can usually be obtained locally. Global implications of using rice hull waste are tremendous. Rice is the world’s main staple crop, generating 100 million tons of hulls annually, which is traditionally burned along with the straw in the fields, causing pollution and health problems. Burning the crop waste in small power plants could generate electricity, dispose of the waste, and provide a high-quality cement substitute.


To minimize the environmental problems with concrete, the following measures should be taken:

  • Reduce concrete waste by recycling crushed concrete for fill material or road base, or grinding it up for aggregate. (Currently only 5% of concrete is recycled. By weight, it represents up to 67% of construction and demolition waste.)
  • Carefully estimate the amount of concrete required to avoid ordering excess amounts that become waste.
  • Consider less material-intensive alternatives to poured-in-place concrete, such as insulation-form walls and autoclaved cellular concrete block. Precast concrete is factory-made to order, which, due to controlled production processes, also reduces concrete waste.
  • Use insulated shallow foundations in northern climates; consider pier-and-beam foundations instead of slabs on grade.
  • Protect aquatic ecosystems by washing forms and equipment where runoff will not contaminate waterways.
  • Use the maximum amount of fly ash or other SCM appropriate to the construction application, location, and material quality.

Adapted from Green Building: Project Planning & Cost Estimating, 3rd Edition, available through RSMeans.

Recent Comments




Article Archive

Date Article
11/17/14 Top 10 largest construction project starts in the U.S. - October 2014
11/14/14 Non-residential Construction Starts Rose Gently in October
07/10/14 The Importance of Matching Volume to Contractor Capacity in JOC Procurement Strategy
07/10/14 Consider a Seed Project as Part of Your JOC Procurement Strategy
07/10/14 The Best Unit Price Book for Your Job Order Contract
07/02/14 ECONOMIC NUGGETS – July 1, 2014
10/23/14 Twenty major upcoming Water Treatment Plants and Manufacturing & Warehousing construction projects - U.S. - October 2014
10/23/14 Twenty major upcoming Alberta and British Columbia construction projects - Canada - October 2014
10/15/14 Trend lines of construction starts in Canada - September 2014
10/15/14 Top 10 largest construction project starts in Canada - September 2014
09/17/14 Twenty major upcoming midwest and northwest construction projects - U.S. - September 2014
09/17/14 Twenty major upcoming medical and educational construction projects - Canada - September 2014
09/17/14 Trend lines of construction starts in Canada - August 2014
09/17/14 Top 10 largest construction project starts in Canada - August 2014
08/15/14 Twenty major upcoming medical and educational construction projects - U.S. - August 2014
08/15/14 Twenty major upcoming industrial and water treatment construction projects - Canada - July 2014
08/15/14 Trend lines of construction starts in Canada - July 2014
08/15/14 Top 10 largest construction project starts in Canada - July 2014
07/24/14 Twenty major upcoming entertainment facility and stadium/arena construction projects - U.S. - July 2014
07/24/14 Twenty major upcoming Ontario and Quebec construction projects - Canada - July 2014
07/24/14 Trend lines of construction starts in Canada - June 2014
07/24/14 Top 10 largest construction project starts in Canada - June 2014
07/16/14
07/14/14 Top 10 largest construction project starts in the U.S. - June 2014
02/03/14 Infographic: Where Can You Use Project Leads in the Construction Process?
07/25/13 The Canadian Economy’s Two Great Blessings
02/15/13 Construction Economic Notes – February, 2013
11/05/12 Recycled-Content Tile
10/05/12 Fiber-Cement Siding
09/18/12 Return on Your Green Home Improvement Investment
08/09/12 Green Building Solutions to Stormwater Runoff
08/07/12 An “Aha” Moment Solves Challenge of Cost Estimating Local Circus Roof
07/19/12 Estimate Types
06/20/12 Ground-Source Heat Pump
05/14/12 Universal Design for Outdoor Living
04/23/12 What Is Universal Design?
04/09/12 Natural Landscaping
03/14/12 Green Material Alternatives for Plumbing Fixtures
03/02/12 Budgeting & Financing Green Construction
02/22/12 Greening Your Firm
02/10/12 Roofing Defects
02/06/12 Roofs: energy efficiency strategies
01/18/12 Commercial Real Estate and Green Construction
12/14/11 Renewable Energy & Distributed Generation Technologies
11/04/11 Tubular Skylights
10/04/11 Are Online Ads An Endangered Species?
09/27/11 Performance Bonds Guarantee Clients Receive Exceptional Service
09/15/11 Deconstruction for Green and Economic Benefit
09/01/11 4 Ways for Businesses to Create a Good First Impression on Twitter
08/11/11 Building Information Modeling (BIM) for Green Building
07/21/11 Green Alternatives for Concrete
07/12/11 Evaluating Products Over Their Life Cycle
06/30/11 Low-Cost Green Strategies
06/28/11 Bricks are from Venus, Clicks are from Mars
06/17/11 Zombie Avoidance Techniques for Building Product Manufacturers
06/08/11 Blogs & Websites: The 5 Signs of Website Wellness
06/06/11 Building Product Manufacturers & Green Products
06/01/11 Is Fear of Sharing Information Costing Your Company Sales?
05/26/11 What Are Green Products?
05/20/11 The Building Envelope
05/16/11 Blogging: Website Heal Thyself
05/03/11 Metals Compared to Wood for Sustainable Construction
04/12/11 Storm Water Collection & Infiltration
03/23/11 Commissioning the Green Building
02/23/11 Building Program for Green Design
01/21/11 Building Deconstruction Process
05/02/11 Why Building Product Manufacturers and Social Media Are a Marriage Made in Heaven
05/06/11 Building Product Manufacturers: How Understanding Architects Can Help Your Business
10/21/09 Distributors & Manufacturer Representatives
07/15/10 Estimating Doors: Tips from the Experts
07/06/10 How to Handle Construction Materials to Prevent Mold
06/21/10 How to Maximize the Benefits of Exterior Security Lighting
06/04/10 SmartBuilding Index
06/01/10 Regional Housing Construction Tracking and Forecast Information
05/28/10 How to Find Regional Construction Tracking and Forecast Information
05/24/10 Building Product Manufacturers
05/18/10 Practicing the Art of Sustainability - Why Atlanta's Current Building Codes Need Updating Now
02/23/10 Learning to use EE
01/11/10 Earn AIA CEU Credit Attending RCD Webcasts
07/17/09 Cost Estimators Winning Work With BIM
07/16/09 Becoming an Invited Bidder - More Tips
07/16/09 Becoming an Invited Bidder - Tips
07/16/09 Becoming an Invited Bidder
07/16/09 SmartBIM Object Modeling Guidelines for Revit
07/15/09 Interference Check and BIM
06/26/09 A Look at Contractor Failure: Part 2
06/19/09 RicciGreene Associates
06/19/09 Doug Thornton AIA, LEED A.P. of AERC, PLLC
06/18/09 A Look at Contractor Failure: Part 1
06/12/09 Owners and SmartBIM Objects – What You Need To Do
06/10/09 Dealing with the IRS
06/05/09 Getting Paid on Construction Contracts
06/02/09 BIM Coordination and Collaboration
05/28/09 Marketing Your Construction Firm on the Cheap
05/20/09 Little Habits with Big Payoffs for Contractors
05/12/09 SmartBIM Spaces
05/07/09 AIA Show Recap as Seen by the SmartBIM Solutions Team
04/27/09 Business Case Study - Survey Of Spending Patterns In Educational Facilities
04/23/09 Taking Advantage of the Recession: Hiring the Right People
04/20/09 Cork as a Green Flooring Option
04/08/09 Owners - It's Time to Substantially Increase Your Architect's and Engineer's Fees
03/05/09 There's a Solution to Performing Time Consuming Quantity Take-Offs
02/20/09 SmartBIM Library is Half-Off for a Limited Time Only
02/09/09 You are Wasting Your Money
01/20/09 Obama: 'Dramatic Action' On Economy Needed
01/14/09 Use of BIM Jumps Dramatically Over Last 12 Months
12/10/08 Minimizing the Size of Family Files (Revit Objects)
11/11/08 Maximize Online Advertising Dollars
11/07/08 Architects and Engineers, WE NEED YOU
10/29/08 Why Do You Need SmartBIM Objects
10/28/08 Why Building Information Modeling?
10/29/08 10 Questions To Ask About BIM Objects
10/08/08 The Object Mess
10/07/08 Implementing BIM to Your Office
10/06/08 Meeting the Needs for Governmental BIM Compliance while Avoiding Current Liability Obstacles
09/15/08 The BIM Transformation is Manageable with the NEW SmartBIM Library v3
09/14/08 KOLBE Windows and Doors vs. Building Information Modeling
09/12/08 The Evolution of Building Information Modeling: BIM 1-2-3
08/11/08 BIM 101 Overview - From Hand Drawings, CAD and now BIM
08/12/08 Draper, Inc. on BIM Object Developments
07/08/08 IFD Library Partners work to establish standards for creators of BIM software
06/23/08 Architectural Education
06/17/08 Parametric Revit Objects – Part I - Fundamentals
06/17/08 Window Glazing Coefficients
06/01/08 Frequently Asked Questions About Building Codes
06/05/08 Calling All Current and Prospective Revit Users - This Blog Is For You
05/06/08 System Requirements for SmartBIM Library
05/06/08 SmartBIM Library 2.0 Release Notes
05/05/08 Building Information Modeling Moves into AEC Mainstream, Adding Value to Project Delivery Process
04/08/08 Flooring: Cost Considerations
02/08/10 General Contractors & Trade Contractors
01/24/08 Building Element Models (BEM)
12/21/07 LEED Certification Primer
12/13/07 Building Integrated Photovoltaics (BIPV)
09/24/07 Mixed-mode Building Design Combines Old and New Ideas
10/15/07 Checklists Identify Potential Envelope Design Improvements
10/24/07 Greenroofs as High Performance Design
10/21/07 What Makes a Building Product Green
10/24/07 Lighting Considerations in Green Building
10/24/07 Water Conservation in Green Buildings
10/24/07 Rainwater Collection Systems
10/24/07 Efficient Cooling Methods for Green Buildings
10/24/07 Controlling Heat Transfer in Green Buildings
10/24/07 Limiting Heat Loss Through Windows
10/23/07 Formaldehyde Use in Building Construction
10/23/07 Using Plants to Improve Indoor Air Quality
11/05/07 Greening Healthcare
10/19/07 Daylighting Controls
10/19/07 Use of Windows, Skylights and Light Pipes in Daylighting
10/19/07 An Overview of Daylighting
10/19/07 An Overview of Solar Ventilation Air Heating
10/19/07 Types of Collectors for Solar Water Heating
10/19/07 An Overview of Solar Water Heating
10/19/07 Cooling Load Advoidance
10/19/07 Components of Passive Solar Heating Designs
10/19/07 An Overview of Passive Solar Heating
10/23/07 Improving Indoor Air Quality
10/19/07 An Overview of The LEED Rating System
10/19/07 Cost Considerations in Building Deconstruction
10/17/07 Building Deconstruction
10/25/07 Roofing Considerations in Green Building
10/19/07 Green Site Selection and Development
10/24/07 Reducing Energy Use in Buildings
10/17/07 Green Demolition
10/18/07 Integrating Solar Power Generation into Buildings using Thin Film PV
09/10/07 Compost Company Promotes Green Environment
03/31/06 Green Roof Sets An Example For Minneapolis Sustainable Design

CMD Group- construction industry news-image” title=